If you want to put an end to airborne contaminants in your car, replacing the cabin filter with a new one from Filterheads.com is the way to go. Here’s a step-by-step guide to help you with the process:
- Locate the cabin filter, which is positioned on the passenger side of the vehicle.
- Remove the two clips securing the glovebox door by its hinges. You can do this by pulling the clips towards the middle with your fingers or using a pair of pliers.
- Open the glovebox and remove the dampener cord from it. Lower the glovebox to access the filter.
- Unclip both sides of the housing cover to remove it, and then take out the old filter from the housing. Make sure to clean out any debris inside the housing.
- Install the new AQ1153 filter into the housing with its airflow indicating arrow pointing down.
- Reinstall the filter housing door and then reattach the glovebox hinges. Apply pressure on the base sides to ensure it clicks into place.
- While pulling the dampener cord down, partially close the glovebox to reengage the stoppers. Reinstall the dampener cord and fully close the glovebox.
- Reinstall the clips to secure the glovebox door.
By following these steps, you can ensure that the air inside your car is free from contaminants, providing you with cleaner and healthier air to breathe.
Order your new filter from Filterheads.com to ensure it fits perfectly into your vehicle’s cabin filter housing.
Where is the cabin filter located?
The cabin filter is located on the passenger side of the vehicle.
How do I replace the cabin filter?
1. Remove the two clips that secure the glovebox door by its hinges. 2. Pull the two clips towards the middle with your fingers or use a pair of pliers. 3. Open the glovebox. 4. Remove the dampener cord from the glovebox. 5. Lower the glovebox. 6. Unclip both sides of the housing cover to remove it. 7. Remove the old filter from the housing and clean out any debris inside. 8. Install the new filter into the housing with its airflow indicating arrow pointing down. 9. Reinstall the filter housing door. 10. Reinstall the glovebox by reattaching the hinges. 11. Apply pressure on the base sides to click it into place. 12. While pulling the dampener cord down, partially close the glovebox to reengage the stoppers. 13. Reinstall the dampening cord. 14. Close the glovebox. 15. Reinstall the clips.
Where can I order the filter?
You can order the filter from Filterheads.com to ensure that it fits.