Ford Edge Battery Replacement: Step-By-Step Guide for a Smooth Process

Are you ready to replace the 12-volt battery in your 2018 Ford Edge? In this guide, I’ll walk you through the step-by-step process to make the battery replacement a breeze.

Before you start, it’s essential to review the manufacturer’s instructions, gather all the necessary tools, and prioritize safety by wearing gloves and safety glasses.

Your first task is to loosen the fastener for the battery’s hold-down bracket using an 8-millimeter wrench, and then remove the fastener and hold-down bracket.

Afterward, slide the battery forward to access the negative battery cable. Loosen the fastener for the negative battery cable using a 10-millimeter wrench, and remove the cable from the battery’s negative terminal.

Subsequently, it’s time to loosen the fastener on the positive battery cable using the 10-millimeter wrench, remove the cable from the positive terminal, and set it aside.

With the cables off, remove the old battery and its heat shield, and ensure to clean any corrosion off the negative battery terminal before installing the new battery.

Now, you can install the new battery and its heat shield, and proceed to reconnect the positive and negative battery cables. It’s essential to clean off any corrosion on the terminals before reinstalling the cables.

Lastly, push the battery back into place, reinstall the hold-down bracket, and tighten the fastener to secure the battery.

And that’s it! You’ve successfully replaced the 12-volt battery in your Ford Edge. Now you’re ready to hit the road with a fresh and fully-functional battery. Safe travels!

Where is the 12 volt battery located in a 2018 Ford Edge?

The 12 volt battery in a 2018 Ford Edge is located under the hood, making it fairly easy to access.

What tools are needed to replace the 12 volt battery?

You will need an 8 millimeter wrench, a 10 millimeter wrench, an extension, a socket, and a long flat head screwdriver.

What precautions should be taken when replacing the battery?

It’s important to wear gloves and safety glasses. Additionally, using a memory saver to keep the computer’s memories alive during the battery replacement is advisable.

How to clean the battery terminals before installation?

Before installing the new battery, clean any corrosion off the negative battery terminal as it will be difficult to reach once the new battery is installed. It’s also a good idea to clean any corrosion off the positive terminal before reinstalling the positive battery cable.

What should be avoided during the battery replacement?

Avoid pounding the clamps on the battery terminals as this can cause internal battery damage.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top