If you want to put an end to airborne contaminants in your car, installing a new cabin filter from Filterheads.com can be the solution you are looking for.
Here are the 10 easy steps to replace your car’s cabin filter:
- Uninstall the side panel using a screwdriver.
- Remove the panel and use a seven millimeter nut driver to remove the bolts.
- Lower the glovebox, being careful not to stress the hoses and wires still connected.
- Disconnect the light and remove the two screws securing the filter housing door.
- Unclip both sides of the housing cover to remove it.
- Remove the old filter from the housing and clean out any debris inside.
- Install your new AQ1227C filter into the housing with its airflow indicating arrow pointing down.
- Close the filter housing and reinstall the screws.
- Reinstall the glovebox light and assembly by aligning their tabs with their catch, then reinstall the two bolts.
- Lastly, reinstall the panel by aligning the tabs and visit Filterheads.com to order your filter and ensure that it fits perfectly in your car.
By following these simple steps, you can ensure that your car is free from airborne contaminants by replacing the cabin filter with a new one. Breathe fresh and clean air while driving!
How do I install a new cabin filter in my car?
To install a new cabin filter in your car, follow these steps: 1. Uninstall the side panel using a screwdriver. 2. Remove the panel using a seven millimeter nut driver to remove the bolts. 3. Lower the glovebox, being careful not to stress the hoses and wires still connected. Disconnect the light. 4. Remove the two screws securing the filter housing door. 5. Unclip both sides of the housing cover to remove it. 6. Remove the old filter from the housing and clean out any debris inside. 7. Install the new AQ1227C filter into the housing with its airflow indicating arrow pointing down. 8. Close the filter housing and reinstall the screws. 9. Reinstall the glovebox light. 10. Reinstall the glovebox assembly by aligning their tabs with their catch. 11. Reinstall the two bolts. 12. Reinstall the panel by aligning the tabs. 13. Reinstall the side panel by aligning the tabs. 14. Visit Filterheads.com to order your filter to ensure that it fits.