If you own a 2013 through 2020 Ford Fusion and need to replace the headlight bulbs without removing the bumper, this step-by-step guide is for you. In this article, we’ll walk you through the process of replacing the headlight bulbs and upgrading to brighter ones, without the need for complex tools or professional assistance.
Replacing the headlight bulbs in the Fusion becomes necessary when one or both bulbs are out. Additionally, upgrading to brighter bulbs can improve visibility at night, especially if the car has older lenses that affect the projection of light.
Tools Needed
Before you begin the replacement process, gather the following tools:
- Quarter inch ratchet
- Quarter inch Drive T25 and T27 Torx sockets
- 10 millimeter socket
- Needle nose pliers (both in a 45-degree angle and regular)
Now let’s dive into the replacement process:
Replacement Process
1. Remove Mounting Points: Use the T25 and T27 Torx sockets to remove the upper mounting points and the two 10-millimeter bolts for the driver’s side headlight.
2. Remove Hood Bumper Stop: Use the needle nose pliers to remove the hood bumper stop and the additional 10-millimeter bolt located under it.
3. Access the Headlight Compartment: Remove the rubber cup to gain access to the back of the bulb.
4. Remove the Old Bulb: Rotate the old bulb to loosen it from the socket. Disconnect the harness and inspect the connector for any damage.
5. Install the New Bulb: Connect the new bulb to the harness ensuring it is fully seated and locked into place.
6. Reassemble: Put everything back together in the reverse order and ensure all bolts are started by hand before tightening.
7. Test the New Bulb: Compare the visual difference between the new white light bulb and the old yellow halogen bulb to see the improvement in brightness.
Conclusion
By following these simple steps, you can replace the headlight bulbs in your Ford Fusion without the need for professional help. This process not only saves time and money but also allows you to upgrade to brighter bulbs for improved visibility at night. If you found this guide helpful, share it with other Ford Fusion owners to help them carry out the replacement process effortlessly. With the right tools and a little effort, you can have your bulbs replaced and be back on the road in no time.
For those looking to purchase the recommended headlight bulbs, a link has been provided in the description for easy access. Thank you for watching and stay tuned for more helpful guides here at the Driver Mod.
What is the video about?
The video demonstrates how to replace the headlight bulbs in a 2013-2020 Ford Fusion without removing the bumper and also discusses the upgrade to brighter bulbs for better visibility at night.
What tools are needed for the replacement process?
The tools required for the replacement process include a 1/4 inch ratchet, a quarter inch Drive T25 and T27 Torx sockets, a 10mm socket, and needle nose pliers.
What type of bulbs are being used for the replacement?
The bulbs being used for the replacement are Silver Star H11 bulbs from Sylvania, which are known for providing a brighter white light compared to the stock yellow halogen bulbs.
How long does the replacement process take?
The video suggests that both bulbs can be replaced within 45 minutes to an hour using simple hand tools.