Replacing the 2015 Honda Civic Key Fob Battery: Easy Steps and Tips

Welcome to Programming Remote! Today, we’ll walk you through the process of changing the battery in a Honda remote head key. To do this, you’ll need a replacement CR1620 battery, a small Phillips head screwdriver, and a flathead screwdriver.

The first step is to use the Phillips head screwdriver to remove the small screw on the back of the key. Be careful not to lose the screw. Once the screw is removed, you’ll notice a notch on one of the sides. Use the flathead screwdriver to gently twist and pop the key apart. You can also use the screwdriver to pry it open further near the keyblade.

Inside, you’ll see the old battery. Use the flathead screwdriver to lift it out from the slot, and replace it with the new battery, ensuring that the plus side is facing downwards. Once the new battery is in place, carefully snap the key back together, starting near the key ring and then gradually securing the rest of the key.

Finally, use the small Phillips head screwdriver to tighten the screw on the back of the key. That’s it! You’ve successfully changed the battery in your Honda remote head key.

If you have any questions, feel free to reach out. And if you found this guide helpful, consider liking and subscribing to our channel for more tutorials. Your support is greatly appreciated! Thank you.

What battery does the honda remote head key take?

The remote head key takes a replacement battery CR1620.

What tools are needed for the battery change?

You will need a small Phillips head screwdriver and a flathead screwdriver.

How do I open the remote head key to access the battery?

Use the Phillips head screwdriver to unscrew the small screw on the back. Then, use a flathead screwdriver to twist and pop the key apart, and pry it open near the keyblade.

How do I replace the battery in the remote head key?

After opening the key, locate the battery in the back cover. Use the flathead screwdriver to remove the old battery and install the new one with the plus side down. Then, snap the key back together and tighten the small screw.

How can I support the channel?

If you have any questions, please like and subscribe to the channel. Your support is appreciated.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top