Welcome back to JRF Mechanical! Today, I’ll be demonstrating how to change the transmission fluid in a Nissan Versa. It’s a straightforward process, but it’s important to do it correctly to maintain the car’s performance.
The first step is to remove the battery, as it provides easier access to the dipstick hole and allows you to work more comfortably.
Using a screwdriver, you need to unclog the dipstick by pushing on it. Keep in mind that this model may not come with a traditional dipstick, so employing the oil dipstick as a measuring tool is necessary.
Before draining the fluid, use the oil dipstick to gauge the current fluid level. This step helps in determining how much fluid needs to be replaced.
When it comes to refilling the transmission, a long, skinny funnel is required, given the limited space available. It’s crucial to use the recommended fluid type, in this case, Asin CFT NS3, and pay attention to the quantity required, usually around 5 quarts.
For the drain plug, a 5-millimeter hex bit socket or an Allen wrench is needed to initially remove it. Ensure the car is on a level surface when draining the fluid.
After replacing the drain plug, you can proceed to fill the transmission with the new fluid. Keep an eye on the fluid level to match the amount you initially drained.
Remember to secure the drain plug properly and clean any spills to prevent leakage and ensure optimal performance.
With these steps followed meticulously, you should have successfully changed the transmission fluid in your Nissan Versa, contributing to the longevity of your vehicle.
Thank you for tuning in, and I hope this guide was helpful. If you have any questions or need further assistance, feel free to leave a comment. Don’t forget to give this article a thumbs up!
What is being worked on in the video?
The video demonstrates how to change the transmission fluid on a Nissan Versa.
Why is the battery removed?
The battery is removed to make it easier to access the transmission fluid dipstick and fill the transmission with new fluid.
What type of fluid is used for the transmission?
The video mentions using Asin CFT fluid, specifically the NS3 type, for the Nissan Versa’s transmission.
What tools are needed for the transmission fluid change?
Tools required include a screwdriver, a long, skinny funnel, a 5mm hex bit socket or an Allen wrench, and a 19mm socket.
How is the transmission fluid level checked?
The transmission fluid level is checked using the oil dipstick before draining the old fluid. The correct level is indicated by the oil reaching a certain point on the dipstick.