2018 Ford Edge Key Fob Battery: Replacement Guide & Troubleshooting Tips

If you need to change the battery in your Ford remote key fob, it’s a simple process that you can do at home. Here’s a step-by-step guide on how to do it:

This key fob requires a replacement battery CR2450. You can easily purchase these batteries online.

Steps to change the battery:

  1. Remove the emergency key from the bottom of the smart key by pressing the designated button.
  2. Hold the fob with the buttons facing down and locate the slot at the bottom. Insert the key into the slot and push up on the back cover to open it.
  3. Once the back cover is open, you will see the battery. Use a small flathead screwdriver or a pointed tool to lift the edge of the battery and remove it.
  4. Take the new CR2450 battery and insert it into the slot with the plus side facing up. Push it all the way in to ensure it’s properly seated.
  5. Close the back cover by aligning the top part first and then snapping it into place.
  6. Reinsert the emergency key back into the smart key.

That’s it! Your Ford remote key fob should now have a new battery.

If you have any questions, feel free to reach out. And if you found this guide helpful, consider liking and subscribing for more helpful tips. Thank you for watching!

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top