If you own a 2011 through 2018 third generation Ford Focus and need to reset the oil maintenance light, you’re in the right place. Follow the simple steps below to do it yourself.
To start, get into the car and shut the door. Insert the key and turn it into the on position, but refrain from starting the car.
When the oil maintenance light illuminates, press and hold the brake and the gas pedal all the way down. You will see a message indicating “oil reset in progress.” Continue to hold the pedals for about 15 seconds.
After this, the maintenance light should clear itself, and a message confirming the reset completion will display. Release the gas and the brake, and then turn the key off. This confirms the completion of the process.
To verify that the reset was successful, turn the key back on. The warning should not reappear. Bear in mind that other maintenance reminders, such as for washer fluid, may still pop up.
These easy steps allow you to reset the oil maintenance light without the need for a visit to the dealership or mechanic.
If you have any questions or need further assistance, feel free to drop them in the comment section below.
Thank you for reading!
How do I reset the oil maintenance light on a 2013 Ford Focus?
To reset the oil maintenance light on a 2013 Ford Focus, follow these steps: 1. Get into the car and shut the door. 2. Turn the key into the on position, but don’t start the car. 3. When the oil maintenance light comes up, hold the brake and the gas pedal all the way down. 4. A message will come up saying ‘oil reset in progress’, continue holding the pedals for about 15 seconds. 5. After the maintenance light clears itself off and a message appears saying ‘reset complete’, release the gas and the brake and set the key off. 6. Verify that the reset has been completed by turning the key on again to ensure the warning does not reappear.
Will the reset process work for other Ford Focus models?
Yes, this reset process should work for any 2011 through 2018 third generation Ford Focus.
What should I do if the reset process does not work?
If the reset process does not work, it is recommended to consult the vehicle’s manual or seek assistance from a professional.
How long should I hold the brake and gas pedals during the reset process?
You should hold the brake and gas pedals all the way down for about 10 to 15 seconds during the reset process.