If you’re experiencing issues with the radio in your 2012 Hyundai Santa Fe, understanding the fuse locations and potential troubleshooting steps can be helpful. In this guide, I’ll walk you through the fuse locations and provide some tips for troubleshooting your car’s radio.
To begin, the number of fuses for your radio depends on whether you have navigation or an amplifier tied to your trim level. You can access these fuses behind a cover, which is typically located at the bottom of the dashboard.
Firstly, you’ll need to remove the cover by gently pulling it away at the bottom. Once the cover is removed, you can locate the fuses and their corresponding functions.
The 15 amp fuse at the bottom provides constant power to the head unit through a black or black-red wire. This ensures that the head unit receives power at all times.
Next, there’s a 10 amp fuse that only sends power to the head unit when the car is on. This functions similarly to the ignition switch, providing power when the car is in use.
For some Santa Fe models, there may also be a 30 amp fuse that powers the amplifier located beneath the passenger seat. This fuse sends constant power through a red-black wire to the amplifier.
If you’re encountering unusual behavior with the factory radio, a simple troubleshooting step involves resetting the radio. By removing all of the radio-related fuses and leaving them out for about five minutes before reinstalling them, you may be able to resolve certain radio issues.
It’s important to note that original factory radios can sometimes exhibit erratic behavior, and a radio reset may offer a solution to restore functionality.
Ultimately, understanding the fuse locations and learning how to perform a radio reset can serve as a valuable starting point for troubleshooting the radio on your Santa Fe.
If you have any questions or need further assistance, feel free to reach out in the comments section below.
Where are the fuses for the operation of the radio located in a 2012 Hyundai Santa Fe?
The location of the two or three fuses for the operation of your radio in a 2012 Hyundai Santa Fe can be found behind the cover near the bottom of the car’s interior. These fuses can be accessed by removing the cover and are located there, depending on whether or not you have nav or an amplifier tied to your level of trim.
What is the color coding for each wire that goes to the head unit?
The 15 amp fuse sends power from a black-red wire constantly to the head unit. The 10 amp fuse sends power to the head unit or the radio only when the car is on, and it is associated with ignition switch power and battery power. Additionally, some models may have a 30 amp fuse that provides power to the amplifier, located underneath the passenger seat, with power constantly sent on a red-black wire.
How can a radio reset be performed on a 2012 Hyundai Santa Fe?
To perform a radio reset on a 2012 Hyundai Santa Fe, you can remove all the radio-related fuses and leave them out for about five minutes, then reinstall them. This may help fix any unusual behavior or issues with the radio.
What can be done if the original factory radio in a 2012 Hyundai Santa Fe starts acting weird?
If the original factory radio in a 2012 Hyundai Santa Fe starts to act weird, performing a radio reset by removing and reinstalling the radio-related fuses after a few minutes may help resolve any issues and get the radio working again.