In this tutorial, we will guide you through the process of replacing the rear wiper arm on your Nissan Rogue. The rear wiper arm is located on the back glass of the vehicle.
First, locate the cap on the back wipe arm and pop it up to access a 12 millimeter nut. Loosen and remove the nut to detach the old arm.
To remove the blade, gently fold the top end with the hinge. Then, disconnect the blade and install the new one by inserting the top down and aligning the pin with the notch on the arm. Press it into place and secure the cap.
Finally, lift up the arm and wiggle it down onto the post, reinstall the nut, tighten it, and fold the cover down to snap it in place.
Make sure everything is snug and secure, and you’re all set!
When it comes to quality auto parts, TRQ is the best choice. TRQ is committed to offering high-quality aftermarket auto parts engineered for peace of mind.
Thank you for using and viewing with TRQ.
Where is the rear wiper arm located on a Nissan Rogue?
The rear wiper arm on a Nissan Rogue is located on the back glass.
What tools are needed to replace the rear wiper arm?
To replace the rear wiper arm, you will need a 12 millimeter nut driver.
How do you replace the rear wiper arm on a Nissan Rogue?
To replace the rear wiper arm on a Nissan Rogue, follow these steps: 1. Pop up the cap on the back wipe arm to access the 12 millimeter nut. 2. Loosen and remove the 12 millimeter nut. 3. Remove the old arm. 4. Disconnect the blade by gently folding out the hinge and then removing it. 5. Install the new blade by inserting the top down and aligning the pin with the notch on the arm, then press it up and on. 6. Line up the cap and lift up the arm, then wiggle it down onto the post. 7. Install the nut and tighten it down. 8. Fold the cover down and snap it on. You’re all set.