If you’re a Ford driver experiencing the P0150 error code, you’re in the right place. This video will guide you through three practical solutions to fix the error at home.
First, use the Zeus app to scan your vehicle and identify the P0150 error code, which indicates that the oxygen sensor bank 2 sensor 1 fails to meet the minimum and maximum voltage limits calibrated for the ECM.
Method A: Patch the Exhaust Leaks
The exhaust system of a vehicle starts at the engine combustion chambers and runs along the undercarriage, ending with the visible tailpipe. If there is a leak, use exhaust putty to seal it up. Clean the leaking area with sandpaper and a wet wipe, then apply and press the paste to seal the area. Allow it to cure for 24 hours, depending on the external temperature.
Method B: Wrap Up the Exhaust Leaks
If there are leaks around the welded seam of the exhaust pipes, clean the area and wrap it with heat wrap. Squeeze it to make the resin go all through and let the car run for 30 minutes to cure it.
Method C: Check the Oxygen Sensor
Visually check the oxygen sensor’s electrical connections, wire harness, and metal tabs for damages. If any damages are found, replace the oxygen sensor located right before the catalytic converter in bank two, which is on the side with cylinder number two.
After performing the repair, use the Zeus app to clear the error code and rescan your vehicle to ensure everything is fine.
For more information, claim a free engine code scanner from the link in the description. Feel free to leave comments, and our mechanic professionals will respond shortly.
Thank you for watching!
What does the error code p0150 indicate for a Ford vehicle?
The error code p0150 indicates that the oxygen sensor bank 2 sensor 1 fails to meet the minimum and maximum voltage limits calibrated for the ECM.
What are the three practical solutions to fix the p0150 error code on a Ford vehicle?
The three practical solutions to fix the p0150 error code on a Ford vehicle are: 1. Method A – Fixing exhaust leaks using exhaust putty. 2. Method B – Wrapping up the exhaust leaks using heat wrap. 3. Method C – Checking and, if necessary, replacing the oxygen sensor located before the catalytic converter.
How can I clear the error code p0150 after fixing the issue?
After fixing the issue, you can use the Zeus app to clear the error code. Simply tap the rescan button to make sure everything is fine with your vehicle.
Where can I get a free engine code scanner?
To save money on car expenses, you can claim a free engine code scanner at the description link in the video or check out the provided video for more information.