Dealing with the P 2647 error on your 2004 Honda Accord? Don’t worry, we’ve got you covered. In this guide, we’ll walk you through the steps to address this common issue in the comfort of your own garage.
First things first, let’s identify the culprit. The plug-in located on the VTEC solenoid is a common problem, as indicated in the Honda service manual. This is the component we’ll be focusing on for this DIY fix.
Unplugging the Connector
To begin, use a long screwdriver to reach down and securely grab the connector with pliers. Apply gentle pressure to the push part of the connector using a flathead screwdriver, while wiggling and pulling up to successfully unplug it.
Replacing the VTEC Solenoid
Next, utilize a 7/8 socket and ratchet to unscrew and remove the old VTEC solenoid. Take the new component and securely install it in place.
Important Tip: Testing the Sensor
Before proceeding, it’s advisable to measure the ohms on the old and new VTEC solenoids. By doing this, you can ascertain if the replacement is necessary based on the ohm readings. This proactive step can save you from potential return issues if the new part proves to be unnecessary.
Dealing with the O-Ring Seal
If a new seal is included with the replacement part and the old seal remains, carefully use a pick tool to scrape away the old o-ring. This meticulous process ensures a proper seal for optimal performance.
With these steps, you should successfully address the P 2647 error in your 2004 Honda Accord. Always refer to the service manual for specific details and consult a professional if needed. Remember, taking preemptive testing measures and handling the replacement with care can save you time and hassle down the road.
What is the P 2647 for a 2004 Honda Accord?
The P 2647 is a common problem in a 2004 Honda Accord. It relates to the VTEC solenoid and its plug.
How do I unplug the connector in a 2004 Honda Accord related to the P 2647 issue?
To unplug the connector, use a long screwdriver and pliers to grab onto the connector, then push with a flathead and wiggle to pull it out.
What tool can be used to take out the VTEC solenoid in a 2004 Honda Accord?
A 7/8 socket and ratchet can be used to take out the VTEC solenoid in a 2004 Honda Accord.
How can I test if the VTEC solenoid in a 2004 Honda Accord is working properly?
Before swapping out the sensor, measure the ohms on the old one and the new one. A significant difference in ohms readings indicates a potential issue.
What should I do if the old seal does not come off with the VTEC solenoid in a 2004 Honda Accord?
If the old seal does not come off, use a pick to scrape away the old o-ring and ensure a proper seal for the new VTEC solenoid.