If you’re experiencing the “System Off to Save Battery” message in your Ford, there’s a simple fix you can do without having to visit the dealership.
In my case, I have a 2013 F-150, but 2009 to 2014 model years are essentially the same. I encountered the “System Off to Save Battery” message just after turning the key off, even though the battery was in good condition.
After conducting some research, I discovered that this issue is relatively common and can be resolved without incurring dealership costs.
The problem seems to stem from a relatively new technology related to battery saver mode, which was likely introduced around 2012.
Here’s a simple step-by-step guide to fix the issue:
- Locate the negative side of the battery.
- Identify the plastic circle thing wrapped around the negative cable, which is responsible for monitoring the current from the battery.
- Find the tab on the bottom of the plastic circle and detach it from the negative cable.
- Secure the detached piece in place using a zip tie to prevent it from moving around.
- Close the hood and you’re good to go!
By following these simple steps, you can eliminate the “System Off to Save Battery” message and prevent your truck from shutting off immediately after turning the key. You don’t need any tools, and the process takes less than 10 seconds to complete.
So, next time you encounter this issue, there’s no need to visit the dealership or incur diagnostic test costs. The problem can be easily solved with this quick DIY fix.
What does it mean when my Ford displays a ‘system off to save battery’ message?
The ‘system off to save battery’ message in a Ford indicates a common issue where the vehicle’s electrical system shuts off to save battery power, even when the battery is in good condition. This can be frustrating, especially when it happens immediately after turning the key off.
How can I fix the ‘system off to save battery’ issue in my Ford?
To fix the ‘system off to save battery’ problem, locate the negative side of the battery and identify a plastic circle thing wrapping around the negative cable. Detach it and secure it in place with a zip tie to prevent it from causing the system to shut off unnecessarily. This simple fix can be done in less than 10 seconds at no cost, without the need for any tools or a visit to the dealership.