Welcome to Program Your Mode! Today, we’ll guide you through the simple process of changing the battery in your Tesla fob.
To complete this task, you will need a replacement CR2032 battery and a small flat-head screwdriver.
Let’s get started. Begin by flipping the fob over to expose the bottom side. Then, locate the notch at the rear of the fob.
Insert the screwdriver into the notch and gently pry off the bottom cover. Once removed, you’ll have access to the old battery.
Use the screwdriver to carefully remove the old battery, and then take the new CR2032 battery, ensuring to align the plus side properly before inserting it.
Finally, snap the cover back into place, and you’re all set!
If you have any further questions, feel free to reach out. We’re here to help!
Thank you for reading our guide. Your support by liking and subscribing to our channel is greatly appreciated!
What battery does the Tesla fob require?
The Tesla fob requires a replacement battery CR2032.
What tool is needed for the battery change?
A small flat head screwdriver is needed for the battery change.
How do I change the battery in a Tesla fob?
To change the battery in a Tesla fob: 1. Flip the fob over and locate the notch at the rear. 2. Use a small flat head screwdriver to open the bottom cover by inserting it into the notch. 3. Remove the old battery using the screwdriver. 4. Install the new CR2032 battery with the plus side up. 5. Snap the cover back on.
Do you have any more questions?
If you have any more questions, please feel free to ask in the comments section.