Honda CRV Door Lock Problems: Effective Solutions and Final Thoughts

Are your car’s door locks acting up? Today, we’re going to talk about a common problem experienced in a 2007 Honda CRV, where the customer complained about the door locks not working properly. Let’s dive into the issue and the step-by-step process of fixing it.

So, as the customer reported, the door locks would go wild while driving, locking and unlocking continuously. To verify the concern, a test drive was conducted, and indeed, the door locks were found to misbehave each time the car came to a halt.

Upon investigation, it was discovered that the problem was with the door lock actuators. These actuators were failing to lock the doors completely, causing the body control module to continuously attempt to lock them as the vehicle was in motion.

Fixing the Issue

To address the problem, the faulty door lock actuators needed to be replaced. The process, while a little time-consuming, is relatively straightforward and can be accomplished with the right tools and a bit of patience.

Here’s a brief overview of the process:

  1. Remove the door panels to access the actuators
  2. Identify and carefully remove the screws and electrical connectors holding the actuators in place
  3. Replace the old actuators with new ones
  4. Test the door locks to ensure they are functioning properly

Once the new actuators were installed, a test drive was conducted, and the problem was resolved. The door locks functioned as they should, locking and unlocking seamlessly without any erratic behavior.


Electrical issues with door locks can be frustrating, but with the right knowledge and guidance, they can be efficiently resolved. In this particular case, replacing the faulty door lock actuators successfully addressed the problem, restoring the functionality of the door locks in the 2007 Honda CRV.

So, if you’re facing similar issues with your car’s door locks, consider checking the door lock actuators and following the steps outlined in this guide to resolve the issue.

What is the issue with the 2007 Honda CRV mentioned in the video?

The customer is complaining about the door locks not working properly. They are not locking and unlocking as expected. While driving, the door locks are observed to go ‘crazy’ – opening and closing unexpectedly.

What is causing the door locks to malfunction?

The issue is identified as one of the door lock actuators not completely locking. This causes the body control module to repeatedly attempt to lock the doors when the car comes to a stop, creating the impression of the door locks ‘going crazy’.

How is the problem resolved?

The solution involves replacing the malfunctioning door lock actuator. The process entails removing the door panel, accessing and replacing the actuator, and testing the functionality to ensure the issue is resolved.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top