Today, we’re going to talk about replacing the starter on a 2012 Hyundai Accent with a manual gearbox. The process may seem complicated, but we’ve found a simpler way to get the job done without removing the entire intake manifold. Let’s walk through the steps together.
First, we locate the starters and the metal bracket holding them in place. By removing a 10mm bolt, we create some room to work with. Additionally, disconnecting the oil pressure sensor connector is necessary. After these initial steps, we can easily access the starter and maneuver it out of its position.
Now, why are we replacing the starter in the first place? Well, Hyundai has utilized plastic components in their starters, which can become brittle in cold conditions and may eventually fail. The good news is that a replacement unit is readily available and relatively easy to install.
By following this method, we save a significant amount of time and effort compared to the traditional approach of removing the intake manifold. This simplified process applies not only to the Accent but also to other Hyundai models like the Sonata.
Thanks for tuning in! We hope this guide helps you tackle the starter replacement in your Hyundai vehicle. Stay tuned for more car maintenance tips and tricks.
What car model is featured in the video?
The video features a 2012 Hyundai Accent with a manual gearbox.
What part is being replaced in the video?
The starter of the Hyundai Accent is being replaced in the video.
Why was there a confusion about removing the intake manifold?
There was confusion about removing the intake manifold to access the starter, but the speaker found an alternative method to replace the starter without removing the intake manifold.
What material is the plastic part of the starter made of?
The plastic part of the starter is made of plastic, which sometimes can snap in cold weather, leading to the need for replacement.
How long did it take to replace the starter using the alternative method?
It took approximately 30 minutes to replace the starter using the alternative method, as opposed to dropping the car down and removing the intake manifold.